ScanConnect

Selecting and configuring a scan source is one step in the Preparing to Scan process for both Basic and Standard Mode. This topic covers the selection and configuration of the ScanConnect scan source.

ScanConnect enables you to use ISIS scanning drivers. A collection of ISIS drivers are included with ScanConnect, enabling you to scan using supported scanners. A list of supported scanners can be found on the Laserfiche Support Site. If your scanner is not listed, manually install any ISIS drivers your scanner's manufacturer has provided.

Note: ScanConnect includes the latest drivers available at the time it was released. If your scanner or scanner drivers are newer than your installation of ScanConnect, it is generally the best practice to install or reinstall the scanner drivers after installing ScanConnect.

Note: ScanConnect cannot be used in conjunction with the Kofax ACE CD.

Selecting and configuring this scan source

1. Select Choose Scan Source under File in the menu bar.
2. Select ScanConnect from the drop-down box. Check Show Scan Source Setup. Click OK.
3. Choose a scanner from the drop-down box. If your scanner is not listed, install the scanner's ISIS driver. Click OK
4. Select Scanner Options under File in the menu bar.
5. Configure scanner settings.

   Tip: For more scanner configuration options, see Scanner Settings under File in the menu bar.