Kofax

Selecting and configuring a scan source is one step in the Preparing to Scan process for both Basic and Standard Mode . This topic covers the selection and configuration of the Kofax scan source.

Kofax enables you to perform ISIS scanning using Kofax ACE or Kofax VRS software. Kofax ACE/Kofax VRS version 3.x must be purchased and installed separately.

Note: Kofax software should be installed prior to installing Laserfiche Scanning.

Selecting and configuring this scan source

1. Select Choose Scan Source under File in the menu bar.
2. Select Kofax from the drop-down box. Check Show Scan Source Setup. Click OK.
3. Choose a scanner from the drop-down box. If your scanner is not listed, install the scanner's Kofax driver. Click OK.
4. Select Scanner Options under File in the menu bar.
5. Configure scanner settings.

   Tip: For more scanner configuration options, see Scanner Settings under File in the menu bar.